Another prob. - Axe Software Forums

  Axe Software Forums
  Quest Developer Forum
  Another prob.

Author Topic:   Another prob.

redsun posted 10-05-2003 05:24 BST
I Can't seem to Center my Text, i do |jc but it doesn't center, it stays on the left., also |sxx doesn't seem to be doing anything either.
Thanks.

Alex posted 10-05-2003 10:52 BST
Make sure the "Disable text formatting" option is not turned on in your Quest Options.
Also make sure you're using only one justification code per line. If you use
|jcSomething like this.|jl
Then Quest will centre the text, only to make it go back to the left again.
To use |sxx remember to replace the "xx" with a number, as actually writing "|sxx" won't do anything. For example use |s14 to change the font to size 14.
redsun posted 11-05-2003 11:45 BST
I Checked to see if the disable formatting box was selected and it wasn't selected, and it still didn't work...plus i know i did it right ciz it says: Justified Center, same goes for size, i didn't put |sxx , i put |s20 just to see if it works, but nothing happens.
Thanks.
Alex posted 11-05-2003 11:49 BST
If you email me your ASL file I'll take a look into it for you.
redsun posted 11-05-2003 11:53 BST
That was a fast reply...LOL, It's ok now, I Fixed it....I Didn't know that i needa start |jc or |s20 on a Line with Text on it....See before i put |jc and |s20 on lines by itself :), but i figured it out now, Thank you! :)

Author	Topic: Another prob.
redsun	posted 10-05-2003 05:24 BST I Can't seem to Center my Text, i do \|jc but it doesn't center, it stays on the left., also \|sxx doesn't seem to be doing anything either. Thanks.
Alex	posted 10-05-2003 10:52 BST Make sure the "Disable text formatting" option is not turned on in your Quest Options. Also make sure you're using only one justification code per line. If you use \|jcSomething like this.\|jl Then Quest will centre the text, only to make it go back to the left again. To use \|sxx remember to replace the "xx" with a number, as actually writing "\|sxx" won't do anything. For example use \|s14 to change the font to size 14.
redsun	posted 11-05-2003 11:45 BST I Checked to see if the disable formatting box was selected and it wasn't selected, and it still didn't work...plus i know i did it right ciz it says: Justified Center, same goes for size, i didn't put \|sxx , i put \|s20 just to see if it works, but nothing happens. Thanks.
Alex	posted 11-05-2003 11:49 BST If you email me your ASL file I'll take a look into it for you.
redsun	posted 11-05-2003 11:53 BST That was a fast reply...LOL, It's ok now, I Fixed it....I Didn't know that i needa start \|jc or \|s20 on a Line with Text on it....See before i put \|jc and \|s20 on lines by itself :), but i figured it out now, Thank you! :)